Cloud audio equipment accessories
Cloud professional audio equipment often comes with a range of accessories. These are described alongside each product in the products area of this web site. Additional background on common accessories is presented below.
CDPM: Paging Microphones
The CDPM range of microphones can be used for paging with several Cloud Products and can be integrated with any 3rd party systems that require 'short to ground' for paging access. With four models in the range, CDPM 4, 8, 12 & 16, and the ability to link 32 CDPMs together, designers can provide large, complex and flexible multi-zone paging systems.
Features
- CDPM 4(i), 8(i), 12(i) & 16(i) zone paging microphones
- The first mic on any system must be the (i) version
- Simple CAT5 mic to mic cabling
- Paging group key assignment
- Selected zone, group or 'call all' paging
- First come, first served priority
- 'Busy' indicator to show system in use
- Any mic can be configured with ultimate priority
- High quality cardiod capsule
- Integral compressor
- Choice of 4 chime
- Internal sounder
- Factory reset (by jumper)
<< Back to product details
DM-1: Active Module
Several Cloud products have a facility port which is intended to extend the capabilities of the unit by allowing the connection of a remotely located active module. The combination of products such as the Z8ii and the active modules allow designers to provide simple, cost effective solutions to many customers' requirements that are difficult to achieve with other manufacturers' units.
Features
- Two balanced mic inputs
- Individual level control of each mic
- Common tamperproof HF & LF controls
- Can be used in multiples
<< Back to product details
LM-1: Active Module
Several Cloud products have a facility port which is intended to extend the capabilities of the unit by allowing the connection of a remotely located active module. The combination of products such as the Z8ii and the active modules allow designers to provide simple, cost effective solutions to many customers' requirements that are difficult to achieve with other manufacturers' units.
Features
- Inputs for balanced mic and stereo line
- Individual level controls for mic and music
- Mic can override music
- Remote control of mixer's music source and level
<< Back to product details
RL-1: Remote Music Level Control
Remote music level control compatible with Z4ii, Z8ii, CX263, CX163, 46/50, 36/50, MPA-626 and CXV-225
<< Back to product details
RSL-6: Remote Music Source Select
Remote music source select and level control compatible with Z4ii, Z8ii, CX263, 46/50 and 36/50
<< Back to product details
XLR-F1: Female XLR Connector
Female XLR connector mounted on a plate similar to RL-1, RSL-6
<< Back to product details
XLR-M1: Male XLR Connector
Male XLR connector mounted on a plate similar to RL-1, RSL-6
<< Back to product details
VCA-2: Two Channel VCA Card
Two Channel VCA card for remote level control of CX-A4 & CX-A6 amplifiers. Requires 1 or 2 RL-1s.
<< Back to product details
VCA-5: Single Channel VCA Card
Single channel VCA card for remote level control of CX-450, CX-A850, and CXV-225. Requires 1 RL-1.
<< Back to product details
CXL-40T: 40 Watt Toroidal Transformer
40 Watt Toroidal Transformer compatible with 46/50, 36/50, CX-A450 and CX-A850.
<< Back to product details
CXL-100T: 100 Watt Toroidal Transformer
100 Watt Toroidal transformer compatible with CX-A6 and CX-A4.
<< Back to product details
CXL-800: Rack Mounting Housing
Rack mounting housing designed to accept up to eight toroidal transformers.
<< Back to product details
CXL-4160: 4 x 40 Watt Transformer
4 x 40 Watt 100V/70V transformer module for internal use in 46/50 and CX-A450.
<< Back to product details
CXL-3120: 3 x 40 Watt Transformer
3 x 40 Watt 100V/70V transformer module for internal use in 36/50.
<< Back to product details
CPM-PSU: External Power Supply
External power supply for use when more than one CDPM microphone is required.
<< Back to product details
EQ Card Option: Bose Series II S Loudspeaker EQ Modules
M8, M32, DS16, DS100, MA12, MA12 Single, MA12 Stack, 402, 502A, 502B, 502BEX, 802, MB4, MB24, LT3302, LT4402, LT9402 & LT9702. One channel compatible with Z8ii, Z4ii, CX163, CX263, CX462, 46/50, CX-A450 and CX-A850. Adapter required for CX-A4, CX-A6, MPA-626 and 36/50.
<< Back to product details
RH-8: Control Panel
Ivory control panel for Pump Station & Sub Station.
<< Back to product details
RH-8c: Control Panel
Charcoal control panel for Pump Station & Sub Station.
<< Back to product details
WP-8: Control Panel
Wall mounted control panel for Pump Station & Sub Station.
<< Back to product details
CDR-1: Coming soon!!
Remote control for DCM-1
<< Back to product details